Dynon Avionics SkyView Pilots Users Guide User Manual

Page 218

Advertising
background image

Messages and Alerts

12-2

SkyView Pilot’s User Guide - Revision S

Alerts and messages are all categorized into one of three severity levels:

o Advisory message.

o A condition which is abnormal but not critical in nature; may increase pilot

workload.

o A critical condition that should be addressed immediately; may affect safety of

flight if not addressed.

Figure 217 - Message Notification Area above button 8 (2nd from right), showing a Warning Notification

The Message Notification Area changes its appearance to reflect the highest level of alert that is
present in the system at any given time:

Notification

Style

Alert Type

/

Flashing

Unacknowledged Advisory Message

/

Flashing

Unacknowledged Caution Alert

/

Flashing

Unacknowledged Warning Alert

Solid

Persistent (but acknowledged) Advisory

Message condition still present

Solid

Persistent (but acknowledged) Caution

Alert condition still present

Solid

Persistent (but acknowledged) Warning

Alert condition still present

Solid

No active alerts or messages (no color)

Table 10 – Notification Types

Whenever a new alert or message is generated, the Message Notification Area will flash to
provide a clear visual indication that there are unviewed messages or alerts that have not yet
been seen and acknowledged.

When alert conditions are present - but they have been acknowledged by viewing them - the
Message Notification Area will continue to show the highest notification type of all persisting
alerts or messages. However, if there are no unviewed messages or alerts, the Message
Notification Area will not flash.

Anytime a yellow caution alert is triggered, the following simultaneous events occur:

If audio is connected and an audio alert exists for the particular alert, it will be played.

Anytime a red warning alert is first triggered, the following simultaneous evens may occur:

If installed, the external alarm light will flash (for EMS-based alerts only).

If audio is connected and an audio alert exists for the particular alert, it will be played.

Advertising