Dynon Avionics SkyView Pilots Users Guide - Manual (Page 139)

SV-MAP-270 Navigation Mapping Software
SkyView Pilot’s User Guide - Revision S 7-49
Figure 123 - FPL Menu Figure 124 - FPL Menu Confirmation Prompt
FPL MENU Actions
The following actions can be initiated from the FPL MENU:

EXIT: Select to close the Flight Plan Menu.

INSERT WAYPOINT: Select to bring up the Insert Waypoint pop-up menu.

REMOVE WAYPOINT: Select to remove the currently selected waypoint and adjust the
remaining legs and totals.

MOVE WAYPOINT: Select to move the currently selected waypoint to another place in
the flight plan.

SET OBS MODE: Select to turn on OBS mode using the selected waypoint. When OBS
Mode is active, you can then adjust the inbound course to the waypoint using the CRS
function of the PFD joystick knob.

RESTORE FLIGHT PLAN: Restores a flight plan that was temporarily overwritten by using
the
function from elsewhere in the map.

ACTIVATE LEG: Select to make the leg that ends at the selected waypoint the current
leg.

TOGGLE OVERFLY: Select to toggle the transition type at the selected waypoint from
overfly to flyby or vice versa. An “OF” icon next to the waypoint in the flight plan
denotes that the waypoint will be overflown instead of flown by.

REVERSE FLIGHT PLAN: Select to reverse the sequence of waypoints in the Flight Plan.

CLEAR TO END: Select to clear all waypoints from the currently selected waypoint to the
end of the Flight Plan.

CLEAR FLIGHT PLAN: Select to clear all waypoints from the Flight Plan.