Dynon Avionics SkyView Pilots Users Guide - Manual (Page 73)

EMS Operation
SkyView Pilot’s User Guide - Revision S 5-3
behavior is turned on (per the SkyView System Installation Guide), the tachometer and oil
temperature behave in the following ways:
Tachometer for Rotax 912:
When OIL TEMP < 120ºF, the TACHOMETER displays these ranges:

0-1400 and 4000-6000 RPM in RED

1400-1800 and 2500-4000 RPM in YELLOW

1800-2500 RPM in GREEN
When OIL TEMP > 120ºF, the TACHOMETER displays different ranges:

0-1400 and 5800-6000 RPM in RED

1400-1800 and 5500-5800 RPM in YELLOW

1800-5500 RPM in GREEN
The alarm type for the tachometer is the “self-clearing” type.
Oil Temperature Gauge for Rotax 912:
When OIL TEMP < 190ºF, the OIL TEMP gauge displays these ranges:

100-120 and 230-266ºF in YELLOW

120-190ºF in GREEN if OIL TEMP has been above 190ºF “more recently” than OIL TEMP was
below 120ºF; otherwise 120-190ºF is displayed in BLACK OUTLINED IN WHITE

190-230ºF in GREEN

266-280ºF in RED.
When OIL TEMP is > 190ºF, the OIL TEMP gauge will display different ranges:

100-120 and 230-266ºF in YELLOW

120-230ºF in GREEN

266-280ºF in RED
The alarm type for oil temperature is the “self-clearing” type.
Engine Menu
LEAN
The engine monitor provides multiple methods to assist you in setting the mixture of your
engine for various functions. The first, and most basic, is to just watch the EGT display as the
engine is richened or leaned. You can watch for the EGTs to peak and then richen or lean as
desired from that point. The engine monitor also includes a leaning function to automate this
process.