Dynon Avionics SkyView Pilots Users Guide - Manual (Page 212)

COM Radio Operation
11-10 SkyView Pilot’s User Guide - Revision S
By A-Z / 0-9 Character Entry

Press the APT button twice.

Use the dual concentric knob to type an airport identifier. Note that this search is
limited to airports within 75 miles of your location to speed up entry by limiting the
airport possibilities.
o The small, inner knob chooses characters (A-Z, 0-9)
o The larger, outer knob moves the cursor.

When the desired airport is displayed, press the dual concentric knob on the control
panel to load the airport to the control panel (or press APT to cancel your selection)

Use the TWR, ATIS, GND, and ATC buttons to send the associated airport frequencies to
the standby frequency location.