Dynon Avionics SkyView Pilots Users Guide - Manual (Page 35)

SV-D700, SV-D1000 and SV-D1000T Operation
SkyView Pilot’s User Guide - Revision S 3-9
Screen Layout Configuration
SkyView can display many combinations of PFD, Engine, and Moving Map data in full-screen
and partial-screen configurations as well as distribute this data across multiple displays. Each
display in the system can also have its own layout. This section tells you how to configure the
display(s) in your SkyView system.
SkyView displays only display data from connected modules. For example, if an SV-
EMS-22X module is not present on the network, the display will not show any
engine data.
The following table lists the amount of screen space you can allot for a given page. Note that
pages may also be turned off by the user.
Page 100% 80% 60% 50% 40% 20% OFF
PFD      
Engine    
Map     
Video   
Table 5–Onscreen Page Allotments
The following diagram illustrates example screen layout configurations.
Figure 6–Example Screen Layout Configurations
Manufacturers that install SkyView into their aircraft can choose to standardize the
screen layouts that are available. When a SkyView system is set up this way, you
may not be able to remove some or all of the pages on a display. Additionally, the
LAYOUT and SWAP buttons may not be available.