Dynon Avionics SkyView Pilots Users Guide - Manual (Page 223)

Messages and Alerts
SkyView Pilot’s User Guide - Revision S 12-7
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Caution”
XPNDR GPS IN
OFFLINE
The certified GPS source (optional
connection) that normally
provides GPS position to the SV-
XPNDR-261 for ADS-B Out use is
offline.
“Caution” BACKUP BATTERY IN
USE
System has switched to SkyView
Backup Battery.
“Caution”
OTHER DISPLAY
OFFLINE
A SkyView Display has failed or is
no longer communicating via
SkyView Network.
“Caution”
NEED COMPASS CAL
Magnetic compass heading is not
calibrated
“Caution” NEED USER AOA
CAL
AOA is not properly calibrated
“Caution”
GPS ASSIST
Airspeed information is not
available; GPS is being used to aid
in the computation of attitude
information; Attitude may be
degraded
“Caution”
ADAHRS CAL OLD
Contact Dynon Avionics for
assistance
“Caution” AP BROKEN
DISCONNECT
Autopilot disconnect switch wire
is broken
“Caution” AP DISCONNECT
STUCK
Autopilot disconnect switch wire
is stuck
“Caution”
XPNDR ALT
ENCODER FAIL
Altitude is not being sent to the
SV-XPNDR-26X because it is not
available from its nominal
barometric altitude source.
“Caution”
ACTV ADAHRS
VIBRATION
The currently-active ADAHRS has
detected vibration that will affect
G Meter and Autopilot, attitude
indicator performance.
Troubleshoot when able.
“Caution”
ADS-B IN OFFLINE
The connected ADS-B
traffic/weather receiver has not
replied to a status query in the
last 30 seconds.