Dynon Avionics SkyView Pilots Users Guide - Manual (Page 9)

SkyView Pilot’s User Guide - Revision S ix
Revision Revision Date Description
Q March 2014
Added: Information about SV-INTERCOM-2S
Added: Support for SkyView Touch.
Added: Enroute charts, including VFR, IFR LO and HI. US support via existing Seattle
Avionics Subscriptions at release.
Clarified: GPS assist in Attitude Calculation
Clarified: magnetic heading is not used to aid attitude determination
Added: Support for dual engine monitoring by using two SV-EMS-22X modules.
Added: Support to monitor up to 28 total EGT and/or CHTs by using a second SV-EMS-22X
module.
Clarified: Navigation Mapping Software required to view charts on SkyView
Clarified: SV-COM-C25 product description
Added: Support for SV-KNOB-PANEL dedicated knob control panel.
Added: Support for SV-AP-PANEL dedicated autopilot control panel.
Clarified: Top Bar status area configuration
Added: 60% PFD Screen layout option when paired with 40% Map
Added: Vertical Speed Required to destination Info Item on map and PFD VSI displays the
current VS required to set up at a specified point at or before and above your final
destination waypoint.
Improved: GPS waypoints now displayed in HSI info area for ARINC navigators such as the
GNS and GTN.
Improved: External GPS and nav radios can now be named with a user-configurable 7
character “friendly name” to aid in identifying sources on the HSI display.
Moved: Synthetic Vision description within the PFD Chapter
Added: Conventional analog “six-pack” display mode for primary flight instruments.
Changed: PFD menu now includes MODE button to select between EFIS or Analog
presentation and to toggle SynVis on or off
Added: HSI Source Button is duplicated in the Autopilot Menu for convenience.
Added: Support for showing Flight plans from ARINC IFR GPS navigators such as the GNS
and GTN series both on SkyView’s map (including holds and other procedure turns) and
on SkyView’s flight plan display.
Improved: Timer expiration in top bar changed from yellow to white
Improved: All EMS widgets that have assignable color ranges (red/yellow/green/black)
now have additional color options: blue, white, purple, cyan, and orange.
Changed: All EMS timers that formerly had “flight” or “flt” in their names are now called
“air” timers. The underlying behavior of these timers has not changed.
Improved: Fuel Tank Switch Reminder is now based on Flight Time and not engine Run
Time.
Improved: Press and holding knob/joystick center-click from within the FPL menu brings
up the insert waypoint function.
Improved: When the map pointer is selecting a single item, range is still enabled by
turning the map joystick knob (if two or more items are under the pointer, turning the
knob chooses which one is selected).
Improved: Yellow/red terrain alert coloration disabled on the map page when not in
flight.
Fixed: “Show Airspaces Below” feature did not always properly exclude airspaces whose
altitudes were defined by flight levels (primarily in non-US data).