Section 9. navigating the touch screen, 1 the touch screen, 2 using the touch screen – LAARS MagnaTherm MGV - Installation, Operation and Maintenance Instructions User Manual

Page 44: Boiler status colors

Advertising
background image

LAARS Heating Systems

Page 40

Touch Screen

Open the front panel

to access the

Touch Screen

Section 9
NAVIGATING THE TOUCH SCREEN

9.1 The Touch Screen

The Touch Screen is visible behind a protective
cover and can be accessed by unlocking and opening
the front door. See Figure 22.

9.2 Using the Touch Screen

ALL of the control functions for the MagnaTherm
can be adjusted by navigating into the Touch Screen.

A screen saver is programmed into the display.
Simply touch the screen to wake it up.

While under normal operation,

the Touch Screen

will automatically present this Home screen.

See Menu 1

Menu 1. Home Screen

Menu 2. Status Summary

Figure 22. To access the Touch Screen

The home screen shows a picture of the MagnaTherm

controller. The color of the controller depends on the

status of the MagnaTherm, as shown below.

Color Status Control

Icon

Blue

Normal operation

Red

Lockout

Gray

Standby mode (Burner

switch off)

Gray and

crossed

out

Communication

problem

Yellow

Hold state. This could

be Anti short cycle, fan

speed transitions, etc.

Figure 23. Boiler Status Colors


To check the operation of the appliance, press the large
Control Icon on the Home screen. The system will
present a Status Summary screen for the appliance:

Advertising
This manual is related to the following products: