LAARS MagnaTherm MGV - Installation, Operation and Maintenance Instructions - Manual (Page 48)

LAARS Heating Systems Page 44
Menu 10. Status Summary Screen
Notice the four buttons at the bottom of each
Status Summary screen:
• Configure – Allows an installer to change
some of the setup parameters used by the
system. A password may be required.
• Operation – Used to adjust the setpoints,
change the fan speed, turn a burner on or
off, or turn the pumps on or off.
• Diagnostics – Allows you to run diagnostic
tests, or check the inputs and outputs used
by the system.
• Details – Allows you to check the status of
all of the setup parameters on the control
system.
9.5 Configuring Parameters
In this section, we will give you a quick explanation
of how to change parameters on the controller.
1. From the Home Page screen (Menu 11), press
the icon for the controller.
Menu 11. Home Page Screen
2. The Status Summary page for that controller
will appear. See Menu 12
Menu 12. Status Summary Screen
3. Press the Configure button to start a
configuration session for the controller.
Menu 13.
Configuration Screen
This screen lists all of the configuration groups
that will be outlined in Section 9.