Toa SX-2000 Series - Manual (Page 114)

114
EVENT SETTINGS
RM Event Settings (RM-200SF)
[If Zone selection (Pattern) is selected for "Function"]
(3) Contents (left side)
Select the output zone pattern to be assigned to the keys on the RM-200SF or RM-210.
Set the output pattern using
"Pattern settings Output zone pattern settings" (p. 77) .
If the output zone pattern is set to "None," then it is not possible to set "Control output pattern" (next item).
None (default), Set output zone pattern Available Settings
(4) Contents (right side)
Select the control output pattern that operates in synchronization with the function keys on the RM-200SF
or RM-210.
Set the control output pattern using
"Pattern settings Control output pattern settings" (p. 81) .
None (default), Set control output pattern Available Settings
[If Zone selection (Individual) is selected for "Function"]
(3) Contents (left side)
Select the output zone (individual) to be assigned to the keys on the RM-200SF or RM-210.
Set the output zone using
"System settings Audio output unit" (p. 61) .
If the output zone (individual) is set to "None," then it is not possible to set "Control output pattern" (next
item).
None (default), Set output zone (individual) Available Settings
(4) Contents (right side)
Select the control output pattern that operates in synchronization with the keys on the RM-200SF or RM-
210.
Set the control output pattern using
"Pattern settings Control output pattern settings" (p. 81) .
None (default), Set control output pattern Available Settings
[If "General broadcast" is selected for "Function" ]
(3) Contents (left side)
Select the general broadcast pattern to be assigned to the keys on the RM-200SF or RM-210.
Set the broadcast pattern using
"Pattern settings General broadcast pattern settings" (p. 79) .
Setting the broadcast pattern to "None" and "Control output pattern" (next item) permits only the control
output to be operated in synchronization with the control input.
None (default), Set general broadcast pattern Available Settings
(4) Contents (right side)
Select the control output that operates in synchronization with the keys on the RM-200SF or RM-210.
Set the control output pattern using
"Pattern settings Control output pattern settings" (p. 81) .
None (default), Set control output pattern Available Settings