When no sx-2000sm's network settings are detected – Toa SX-2000 Series User Manual
Page 37
7.1.4. When no SX-2000SM's network settings are detected
When the SX-2000SM's network settings were not detected, the following screen is displayed.
If this display appears, the following causes can be considered.
Connection of LAN cable
LAN cables not connected.
Not straight cable but cross cable is connected.
STP Category 5 Standard straight cable with RJ45 connectors is
not used.
Power of HUB
Switching hub is not powered.
The distance between the SX-2000SM and the switching hub is
more than 100 m.
DC power of SX-2000SM
Power is not supplied to the SX-2000SM.
Connection port of SX-2000SM
Cable is not connected to the SX-2000SM's LAN connector.
Firmware version of SX-2000SM
The SX-2000SM firmware is earlier than Version 3.00.
Since its latest version is made available on the TOA product
download site (http://toa-products.com/), please download it
for use.
Network settings
The IP address, subnet mask, default gateway or HTTP server port of
the SX-2000SM or PC is not correctly set.
37
BASIC SETTINGS
Detecting the SX-2000SM's Network Settings