Detecting the sx-2000sm's network settings, P. 31 "detecting the sx-2000sm's network settings, Settings. (refer to – Toa SX-2000 Series User Manual
Page 31
31
7.1. Detecting the SX-2000SM's Network Settings
It is possible to acquire the SX-2000SM's network settings by connecting the SX-2000SM to a PC.
7.1.1. When a single SX-2000SM is connected to the switching hub
Step 1. Connect the SX-2000SM and the PC installed with the SX-2000 software to the switching hub.
Connect the SX-2000SM's LAN connection terminal to a 10BASE-T- or 100BASE-TX-compatible
switching hub.
Use STP Category 5 Standard straight LAN cable fitted with RJ45 connectors.
Notes
• Do not connect the switching hub to the LAN.
• Avoid directly connecting the SX-2000SM to the PC via a cross cable.
Step 2. Click the [Detect] button.
SX-2000SM
Switching hub
LAN connection terminal
Straight cable
Straight cable
PC installed with the SX-2000
software
BASIC SETTINGS
Detecting the SX-2000SM's Network Settings