Toa SX-2000 Series - Manual (Page 135)

135
UTILITY
System Status Display Confirmation (SM unit screen)
Configuration Displays the "Used" indication when the failure check function is in operation and the
"Unused" indication when the function is not in operation.
Status Displays failure status.
Displays the "Normal" indication for normal conditions and the "Error" indication or the
cause of failure in the event of irregularities.
Displays the " – " indication when the failure check function is not in operation.
5. Control input failure status
6. Close button
Clicking this button closes the SM unit screen.
4. DS Link detail button
Note: This button is used when the VX-2000DS or VX-3000DS has been connected.
Clicking this button displays the DS Link detail screen.
Displays cable connection, AC power supply, battery, and DC power supply statuses.
The "Normal" indication is displayed for normal conditions, the "Error" indication when irregularities are
detected, and the " – " indication when the failure check function is not in operation.
Clicking the [Close] button closes the DS Link detail screen.
Note: In the system including 2 or more VX-3000DS units, if abnormality occurs at any VX-3000DS, the
status of the corresponding item shows "Error."
Displays the control input failure status.