Toa SX-2000 Series - Manual (Page 158)

158
COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
Reading CF Card Setting Data Online
The following screen is displayed when the sound source data saved to the CF card and the sound
source data registered in the setting software are the same.
Step 4. To overwrite, click the [OK] button, and to transfer data other than EV messages, click the [Cancel]
button.
Note
A little time may be required to transfer EV messages.
Clicking the [Cancel] button transfers all setting data except the EV messages, enabling reduction of
transfer times.
The following screen is displayed after loading is completed.
Step 3. Click the [Yes] or [No] button.
Clicking the [Yes] button allows the setting content currently being edited to be saved to a file.
Loading begins after save is completed.
Clicking the [No] button causes loading to begin immediately.
The following screen is displayed during a read operation.
Step 5. Press the [OK] button.