Toa SX-2000 Series - Manual (Page 139)

139
UTILITY
System Status Display Confirmation (AI unit screen)
4. Unit failure status
This function displays the failure status of the SX-2000AI or SX-2100AI unit.
The indicated items are DC power supply, SX link and analog link.
5. DC Power detail button
Clicking this button displays the DC power detail screen.
Displays the DC power supply, fuse and hardware statuses.
The "Normal" indication is displayed for normal conditions, the "Error" indication when irregularities are
detected, and the " – " indication when the failure check function is not in operation.
Clicking the [Close] button closes the DC power detail screen.
Configuration Displays the "Used" indication when the failure check function is in operation and the
"Unused" indication when the function is not in operation.
Status Displays failure status.
Displays the "Normal" indication for normal conditions and the "Error" indication or the
cause of failure in the event of irregularities.
Displays the " – " indication when the failure check function is not in operation.