External failure input, This function is available when the, External failure input" (p. 97) – Toa SX-2000 Series User Manual
Page 97: P. 97, Accepts an external failure state. (refer to
Advertising
97
EVENT SETTINGS
Function Description
12.2.7. External failure input
Failure status of the external equipment can be accepted. Match the settings of the external failure input with
type of a failure signal from the external equipment to "make" (close) or "break" (open).
The failure pattern to which the external failure input is assigned is activated when an external failure signal is
input.
[Example when being "make" at the time of external equipment's failure]
Control output pattern 1: ON
Control input 1
(External failure input, judges failure with make contact)
Failure pattern 1
(Failure status output: Control output pattern 1)
ON
ON
Note
As for which conditions lead the external device into fault status, refer to the manual enclosed with that device.
Advertising