Toa SX-2000 Series - Manual (Page 161)

161
COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
Acquiring System Configuration Data Online
14.4. Acquiring System Configuration Data Online
The SX-2000 system's configuration data can be acquired online.
This function is useful when creating setting data after equipment installation.
Note
Only the component number and type can be acquired for system configuration data.
Other detailed equipment settings are default values.
Step 1. Establish communications between the SX-2000SM and the PC installed with the SX-2000 software.
For the procedure for establishing communications, refer to p. 155 "Establishing Communications
Between the SX-2000SM and a PC."
The "Connection" indication is displayed in the lower right corner of the screen after the connection is
completed.
Step 2. Select [Communication Receive configuration] from the menu bar on the Setting Software.
Note
This selection cannot be made when the Utility screen
(p. 120 "Utility") is displayed.
The following screen is displayed during data edit.