Toa SX-2000 Series - Manual (Page 54)

54
SYSTEM SETTINGS
SX-2000AI and SX-2100AI
• Fade in (sec)
This selection becomes available when "Mixing setting" is set to "REDUCTION."
0 – 6 (default: 4), in 1-sec steps Available Settings
• Attenuation (dB)
This selection becomes available when "Mixing setting" is set to "REDUCTION."
–1 to – 40 (default: – 40) (in 1-dB steps) Available Settings
• PAD
Select the PAD (input sensitivity). This setting is available only when "Module" (p. 50) is set to "D-921F"
or "D-921E."
• Phantom power
Select whether or not to use the phantom power supply. This setting is available when "Module" (p. 50) is
set to "D-921F" or "D-921E," and "PAD (input sensitivity)" is set to either "MIC –36 dB" or "MIC –50 dB."
LINE +4 dB (default), LINE –10 dB, MIC –36 dB, MIC –50 dB Available Settings
OFF (don't use phantom power supply, default), ON (use phantom power supply) Available Settings
(6) Copy and Paste buttons
Pressing the [Copy] button copies all of the on-screen settings except the names preset by default.
Pressing the [Paste] button pastes the copied parameters in the same setting screen of other SX-2000AI
or SX-2100AI selected by Unit number setting item (2).
(7) Back button
Returns to the previous screen.
(4) Key name
Enter each name of the function keys and channel keys on the SX-2000AI's and SX-2100AI's front panel.
(5) Control input/output (SX-2100AI only)
Enter each name of the control inputs and control outputs of the SX-2100AI.
This selection becomes available when "Type"
(p. 52) is set to "SX-2100AI."
Up to 32 alphanumeric characters. (Default name, for example, AI1-CIN1
represents the SX-2100AI's Control Input No. 1, and AI1-COUT1 represents the
SX-2100AI's Control output No 1.) Available Settings
Up to 32 alphanumeric characters. (Default name, for example, AI1-FKEY1
represents the SX-2000AI's or SX-2100AI's Function key No. 1, and AI1-CHKEY1
represents the SX-2000AI's or SX-2100AI's Channel key No. 1.) Available Settings
• Fade out (sec)
This selection becomes available when "Mixing setting" is set to "REDUCTION."
0 – 6 (default: 1), in 1-sec steps Available Settings