Toa SX-2000 Series - Manual (Page 140)

UTILITY
System Status Display Confirmation (AI unit screen)
140
6. RM failure status
This function displays each remote microphone's failure status.
7. RM failure status detail button
Clicking this button displays the RM failure status detail screen.
Displays the DC power supply, connection and hardware statuses.
The "Normal" indication is displayed for normal conditions, the "Error" indication when irregularities are
detected, and the " – " indication when the failure check function is not in operation.
Clicking the [Close] button closes the RM failure status detail screen.
8. Close button
Clicking this button closes the AI unit screen.
Configuration Displays the "Used" indication when the failure check function is in operation and the
"Unused" indication when the function is not in operation.
Status Displays failure status.
Displays the "Normal" indication for normal conditions and the "Error" indication or the
cause of failure in the event of irregularities.
Displays the " – " indication when the failure check function is not in operation.