VACUUBRAND PC 600 LAN NT - Manual (Page 29)

page 29 of 102
Abbreviations
ETFE: Ethylene/Tetrafluoroethylene
ECTFE: Ethylene/Chlorotrifluoroethylene
FFKM: Perfluoro elastomer
FPM: Fluoroelastomer
PET: Polyethylene terephthalate
PPS: Polyphenylene sulfide
PTFE: Polytetrafluoroethylene
Position Component
1 Inlet
2 Outlet
3 Gas ballast valve
4 ON/OFF switch
5 Mains connection
6 Handle
7 Pump rating plate
8 Controller VNC 2
Position Component
9 Catchpot
10
Exhaust waste vapor
condenser
11
Overpressure safety relief
device
12 Coolant inlet
13 Coolant outlet
14 Fan
Pump parts
We reserve the right for technical modification without prior notice!
Gas inlet temperatures
* if pumping potentially explosive atmospheres: 50 °F to 104 °F (+10°C to +40°C)
Operating condition Inlet pressure
Permitted range of gas
temperatures at inlet
Continuous operation
> 75 Torr (100 mbar)
(high gas load)
➨
50 °F to 104 °F
(+10°C to +40°C)
Continuous operation
< 75 Torr (100 mbar)
(low gas load)
➨
32 °F to 140 °F*
(0°C to +60°C*)
Short-time
(< 5 minutes)
< 75 Torr (100 mbar)
(low gas load)
➨
14 °F to 176 °F*
(-10°C to +80°C*)