VACUUBRAND PC 600 LAN NT - Manual (Page 70)

page 70 of 102
Command Operation Response Description
IN_PV_1 current pressure XXXX.X mbar/Torr/hPa unit according to preselections
IN_PV_2 current speed XXX% 1-100% or ”HI”
IN_PV_3 time XX:XX h:m process runtime (hours:minutes)
IN_PV_4
LAN pressure
increase
XXX/min
pressure unit according to
preselections
IN_PV_5
LAN process
time
XX:XX
hh:mm (hours:minutes)
VACUU•LAN: runtime of pump
since last switching of the pump
IN_CFG
device set
preselections
0XXXXXXXXXXXXXXX
1XXXXXXXXXXXXXXX
2XXXXXXXXXXXXXXX
4XXXXXXXXXXXXXXX
X0XXXXXXXXXXXXXX
X1XXXXXXXXXXXXXX
X2XXXXXXXXXXXXXX
XX0XXXXXXXXXXXXX
XX1XXXXXXXXXXXXX
XX2XXXXXXXXXXXXX
XXX0XXXXXXXXXXXX
XXX1XXXXXXXXXXXX
XXXX0XXXXXXXXXXX
XXXX1XXXXXXXXXXX
XXXXX0XXXXXXXXXX
XXXXX1XXXXXXXXXX
XXXXXX0XXXXXXXXX
XXXXXX1XXXXXXXXX
XXXXXXX0XXXXXXXX
XXXXXXX1XXXXXXXX
XXXXXXXX0XXXXXXX
XXXXXXXX1XXXXXXX
XXXXXXXXX0XXXXXX
XXXXXXXXX1XXXXXX
XXXXXXXXXX0XXXXX
XXXXXXXXXX1XXXXX
XXXXXXXXXXX0XXXX
XXXXXXXXXXX1XXXX
XXXXXXXXXXXX0XXX
XXXXXXXXXXXX1XXX
XXXXXXXXXXXXXyXX
XXXXXXXXXXXXXXyX
XXXXXXXXXXXXXXX0
XXXXXXXXXXXXXXX1
VACUU•LAN
continuous pumping
vacuum control
RC 5 / RC 6 management
language: German
language: English
language: French
pressure unit mbar
pressure unit Torr
pressure unit hPa
autostart off
autostart on
acoustic signal off
acoustic signal on
NT VARIO pump not connected
NT VARIO pump connected
VMS not connected
VMS connected
in-line valve not connected
in-line valve connected
coolant valve not connected
coolant valve connected
venting valve not connected
venting valve connected
fault indicator not connected
fault indicator connected
level sensor not connected
level sensor connected
remote module not connected
remote module connected
y: 1......9: sensor number
y: 1......9: sensor quantity
remote operation off
remote operation on
Read commands compatible to ”CVC 3000”