DMP Electronics DMP Command Processor Panel XR500 - Manual (Page 38)

XR500 Series Canadian Programming Guide Digital Monitoring Products
29
SYSTEM OPTIONS
9.12 LATCH SV NO YES Latch Supervisory Zones
Selecting YES latches supervisory zone alarms on the keypad display until the sensor
reset operation is performed. Selecting NO automatically clears the alarm from the
keypad display when the supervisory zone restores to a normal condition. Default is YES.
9.13 PROG LANGUAGE Programming Menu Language
Press the COMMAND key to select the programming language. Any changes in PROG
LANGUAGE do not take effect until the STOP routine completes.
PRI LANG: ENGLSH The current primary programming language displays. The default language is
English. Press a Select key to change the primary programming language.
ENG SPN FRN Select the primary programming language.
ENG = English (ENGLISH)
SPN = Spanish (ESPANOL)
FRN = French (FRANCAIS)
SEC LANG: NONE The current secondary programming language displays. Selecting a secondary
language allows the installer to view programming in English, Spanish, or French.
When the Programming Menu is accessed, the installer is prompted to choose the
programming display language. If SEC LANG: is set to NONE, the option to choose
a language does not display. To select a secondary language, press the Select key
below the language. Default is NONE.
NONE ENG SPN FRN
Select the secondary programming language.
NONE = No secondary language options are displayed
ENG = English (ENGLISH)
SPN = Spanish (ESPANOL)
FRN = French (FRANCAIS)
9.14 USER LANGUAGE User Menu and Status List Language
Press the COMMAND key to select User language.
PRI LANG: ENGLSH The current primary user language displays. The default language is English. Press a
Select key to change the primary User language.
ENG SPN FRN Select the primary user language.
ENG = English (ENGLISH)
SPN = Spanish (ESPANOL)
FRN = French (FRANCAIS)
SEC LANG: NONE The current secondary user language displays. Selecting a secondary user language
allows the user to view the User Menu and Status List text in English, Spanish, or
French. When the User Menu is accessed, the user is prompted to choose the display
language. Status List text displays in the selected language until another language
is chosen. If SEC LANG: is set to NONE, the option to choose a language does not
display. To select a secondary language, press the Select key below the language.
Default is NONE.
For example, when Spanish is selected at a keypad, the User Menu and Status List
text display in Spanish at that keypad. When the user later accesses the keypad,
pressing the COMMAND key once displays the option for English, Spanish, or French.
Pressing the COMMAND key again continues to display the Status List text in Spanish.
Later on, if English or French is selected at that keypad, the User Menu and Status
List text display in the selected language at that keypad.
NONE ENG SPN FRN
Select the secondary user language.
NONE = No secondary language options are displayed
ENG = English (ENGLISH)
SPN = Spanish (ESPANOL)
FRN = French (FRANCAIS)
9.15 BYPASS LIMIT 0 Bypass Limit
Enter the maximum number of zones (0 to 8) that can be bypassed in any single area
when that area is being armed at a keypad. If more zones than the limit are in a
non-normal state or already bypassed at arming, arming does not occur and Arming
Stopped displays. The Bypass limit does not affect auto arming or keyswitch arming.
Entering 0 (zero) allows no limit. Default is 0 (zero).