DMP Electronics DMP Command Processor Panel XR500 - Manual (Page 51)

Digital Monitoring Products XR500 Series Canadian Programming Guide
42
PRINTER REPORTS
Printer Reports
16.1
PRINTER REPORTS
Printer Reports
This section allows you to define the operation of a local printer connected to the
panel through the use of a DMP 462P Printer Interface Card. The 462P allows you to
connect the DMP SCS-PTR or other compatible 40-character or 80-character serial
printer to the panel.
Printing the panel event buffer
The Display Events option in the User Menu contains a PRINT command that allows
the user to send the contents of the panel event buffer to a local printer. The PRINT
option is visible whether or not a 462P Printer Interface Card is attached to the
panel.
16.2 ARM/DIS NO YES Arm and Disarm Reports
Prints arming, disarming, and Late to Close reports. Includes the area number,
name, and action (armed, disarmed, or late), the user number, user name, and time
and date.
16.3
ZONE NO YES
Zone Reports
Prints changes in the active zones status. Includes the zone number, name, and type
as well as the action (alarm, trouble, bypass, etc.) user number (if applicable) and
area name. When the Walk Test or Panic Zone Test is performed, Verify and Fail
messages also print for each zone.
16.4
USR CMDS NO YES
User Command Reports
Prints user code changes, outputs turned ON or OFF (if operated by a schedule, SCH
is shown in Display Events in place of the user number), schedule changes, and User
Menu functions.
16.5
DOOR ACS NO YES
Door Access Reports
Prints door access activity. Includes the door number, first and second user number,
first and second user name, and the time and date of the door access.
16.6 SUPV MSG NO YES Supervisory Reports
Prints System Monitor Troubles and system events. See Status List - System Monitor
Troubles.