Ditch Witch JT100AT - Manual (Page 100)

JT100/JT100 All Terrain Operator’s Manual
Prepare - 99
CMW
©
JT Mode
• Install saver sub, shuttle stop, roller, and roller pin for Mach 1 pipe.
• Use standard transition sub and beacon housing. Select soil bit based on jobsite conditions.
• Use auger type anchors.
• Load JT pipe and pipe box onto unit.
• Move mode selector switch to JT position.
Assemble Accessories
Fire Extinguisher
If required, mount a fire extinguisher near the power unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory
requirements.
Lighting Kit
If you will need additional light, plug lighting kit into provided outlet. Contact your Ditch Witch
®
dealer for
further information.
IMPORTANT: Use conversion kit (p/n 190-1548).
IMPORTANT: Do not put JT pipe into a large All Terrain pipe box. Pipe can jam and box can be
damaged. Use JT pipe box.