Ditch Witch JT100AT - Manual (Page 55)

Controls - 54
JT100/JT100 All Terrain Operator’s Manual
Right Control Console
CMW
©
2. Diagnostic light (red) If system is OK, light is off.
If controller is not getting
power, light is on.
If a non-essential diagnostic
code is recorded, light flashes
on and off for 10 seconds.
If an essential diagnostic
code is recorded, light
continually flashes on for
three seconds and off for half
a second.
See “Diagnostic Codes” on page 173.
3. Shuttle home status
light If shuttle is retracted, light is
on.
If shuttle is extended, light is
off.
IMPORTANT: This light indicates the
shuttle is under the pipe box and out
of the path of the carriage. It does not
mean the shuttle is under the correct
pipe row.
4. Rear home status light If carriage is at rear of drill
frame, light is on.
If carriage is away from rear
of drill frame, light is off.
5. Front home status light If carriage is at front of drill
frame, light is on.
If carriage is away from front
of drill frame, light is off.
Item Description Notes