Ditch Witch JT100AT - Manual (Page 31)

Controls - 30
JT100/JT100 All Terrain Operator’s Manual
Setup Console
CMW
©
6. Left front stabilizer
control To lower, push.
To raise, pull.
Lower both front stabilizers to the
ground together and then adjust
individually.
7. Right front stabilizer
control To lower, push.
To raise, pull.
Lower both front stabilizers to the
ground together and then adjust
individually.
8. Auxiliary hydraulic
pressure gauge Displays hydraulic fluid
pressure to any hydraulic
function in use, including front
and rear stabilizers, optional
pipeloader, stationary and
rotating wrenches, and
optional driver/loader
attachment.
9. Levels Indicates that drilling unit is
level if bubble rests between
the lines as shown.
Use stabilizer controls to set
machine as level as possible,
both front to back and side to
side.
NOTICE: Failure to stabilize drilling
unit in a level position may hinder
driver/loader swing capabilities.
Item Description Notes