Ditch Witch JT100AT - Manual (Page 195)

Service - 194
JT100/JT100 All Terrain Operator’s Manual
Startup/10 Hour
CMW
©
Check JT Fluid Pump Oil Level
Check oil level at sight tube (2) before startup and
every 10 hours of operation. Add NDO at plug (1)
as needed to maintain oil level at halfway point on
sight tube.
Check AT Fluid Pump Oil Level
Check fluid pump oil level at sight glass or
petcock (2) before startup and every 10 hours of
operation. Maintain fluid level at halfway point on
sight glass or at petcock level. Add NDO at cap
(1).
Check Hydraulic Fluid Level
Check hydraulic fluid level before startup and
every 10 hours of operation. Maintain fluid level at
halfway point on sight glass (shown), when unit is
on level ground, engine is off and fluid is cool.
Add THF at hydraulic fluid fill as needed.