Ditch Witch JT100AT - Manual (Page 225)

Service - 224
JT100/JT100 All Terrain Operator’s Manual
As Needed
CMW
©
Replace Wrench Jaw Inserts and
Hardware
Check front and rear inserts and hardware for
wear. See your Ditch Witch
®
dealer for
replacement inserts.
Change Auto Lubricator TJC Pail
Check pipe auto lubricator TJC level and change
pail as needed.
To change pail
1. Remove thumb screws attaching pump
bracket (1) to bucket.
2. Lift pump off of pump bracket.
3. Remove follower plate (2) from empty pail
and install into new pail. Press firmly on
follower plate until TJC comes up in center
opening.
4. Remove empty pail from TJC pail holder.
5. Install new pail into TJC pail holder.
6. Insert pump dip tube through hole in follower plate.
7. Install thumb screws.
NOTICE: Use only genuine Ditch Witch tool joint compound to maintain warranty. See
“Recommended Lubricants/Service Key” on page 188 for more information.