Ditch Witch JT100AT User Manual
Page 145
Advertising
Systems and Equipment - 144
JT100/JT100 All Terrain Operator’s Manual
Driver/Loader Attachment
CMW
©
Cylinder drift
Overload
Remove overload.
Holding valve relief set too low
Replace as required.
Damaged cylinder
Repair.
Dirt in holding or check valve
Cycle under no load to reset; clean
and/or replace.
Air in hydraulic system or
entrapped in cylinder.
Cycle cylinder to remove air.
Problem
Possible cause
Possible solution
Advertising
This manual is related to the following products: