Ditch Witch JT100AT - Manual (Page 222)

JT100/JT100 All Terrain Operator’s Manual
Service - 221
As Needed
CMW
©
Change Drive Belt
Change drive belt as needed.
To change
1. Push tension roller (1) with ratchet in direction
of arrow until locking pin (2) can be fixed in
the mounting hole. Drive belt is now tension-
free.
2. First pull the drive belt from the smallest roller
or from the tension roller.
3. Fit new drive belt.
4. Hold ratchet in the opposite direction from the
arrow and remove pin (2).
5. Loosen the tension pulley in the opposite direction from the arrow until the drive belt is tight, at the
same time checking that the drive belt is positioned correctly in its guides.
Drain Fuel Prefilter
Drain prefilter (1) as needed.
To drain water
1. Place drain pan beneath filter.
2. Loosen drain cock (2) to drain water and fuel
mixture.
3. Tighten drain cock.