Ditch Witch JT100AT User Manual

Page 203

Advertising
background image

Service - 202

JT100/JT100 All Terrain Operator’s

Manual

50 Hour

CMW

©

Check Rotation Gearbox Oil Level

Check gearbox oil level at sight tube (shown)
every 50 hours. Park unit on level surface and
move carriage down drill frame until it is even with
cab. Swing cab out for access to gearbox. Add
MPL as needed.

1.

Remove barbed fitting from port on right side
of gearbox (1). Add oil until it is visible at port.
Reinstall barbed fitting.

2.

Remove vent from front of gearbox and add
oil as needed to maintain level approximately
1/3 of the way up the sight tube.

Check Thrust Drive Gearbox Oil Level

Check thrust drive gearbox oil level at six fill plugs
(2, 3) every 50 hours. Add MPL at fill plugs as
needed until oil is visible at plugs.

Check Ground Drive Gearbox Oil
Level

Park unit on a level surface and check oil level in
both gearboxes every 50 hours. Rotate plug
(shown) until level with center of gearbox (see
dotted line). Open plug. If oil does not come out,
add MPL. Never fill more than halfway.

Advertising
This manual is related to the following products: