Approved coolant, Engine oil selection chart – Ditch Witch JT100AT User Manual
Page 191
Service - 190
JT100/JT100 All Terrain Operator’s
Manual
Recommended Lubricants/Service Key
CMW
©
Approved Coolant
This unit was filled with John Deere
®
Cool-Gard
®
II coolant before shipment from factory. Add only John
Deere Cool-Gard II (p/n 255-006) or any fully formulated, ethylene glycol based, low-silicate, heavy-duty
diesel engine coolant meeting ASTM specification D6210.
Engine Oil Selection Chart
NOTICE:
•
Use only pre-diluted coolant or concentrated coolant mixed with distilled water. Do not use tap
water.
•
Do not use water or high-silicate automotive-type coolant. This will lead to engine damage or
premature engine failure.
•
Do not mix heavy-duty diesel engine coolant and automotive-type coolant. This will lead to coolant
breakdown and engine damage.
t37om047w.eps
SAE 0W-30
SAE 0W-40
SAE 5W-30
SAE 5W-40
SAE 10W-30
SAE 10W-40
SAE 15W-40
SAE 20W-50
Temperature range anticipated before next oil change