Echelon OpenLNS Commissioning Tool - Manual (Page 125)

OpenLNS CT User’s Guide 109
2. Enter the following information:
Subsystem Enter the name of the subsystem. The name must be unique within
the current subsystem and may be up to 85 characters long. The
name may include embedded spaces, but it may not include periods,
backslashes, colons, forward slashes, or double quotes. Subsystem
names are case sensitive.
If you create a subsystem from a copy (a custom subsystem master
SmartShape or an existing subsystem SmartShape), OpenLNS CT
will automatically append a number, starting at 1, to the subsystem
name in the page tab. The number will be incremented by one each
time a subsystem with same name is created. The subsystem name
in the page tab, though, may not match that in the title block at the
top-center of the drawing.
Subsystems with same name can exist within different levels in the
subsystem hierarchy of the same network
.
Drawing Select whether to create the new subsystem in an existing subsystem
or in a new OpenLNS CT drawing page.
• Select Existing to create the subsystem in an existing subsystem
within the current OpenLNS CT network. Select the existing
subsystem in which the new subsystem will be placed. The
current subsystem is listed by default.
• Select New to create the subsystem in a new drawing page
within the current OpenLNS CT network. Enter the name of the
new drawing page in the Name box. The default name is
<Network Name> Subsystem [Index]. An index will be
appended to the name of the drawing page if a naming conflict
exists.
Subsystem Contents Select which objects to copy in the subsystem and any nested