Echelon OpenLNS Commissioning Tool - Manual (Page 361)

OpenLNS CT User’s Guide 345
you are only temporarily using a different network interface, you
may choose not to upgrade. In this case, communication with
physical devices is limited until you reopen the network with the
original network interface. If initially you choose not to upgrade
the NSD and decide later to upgrade, right-click the NSD
SmartShape, and then click Upgrade NSD on the shortcut menu.
When moving from an OpenLNS fast (layer 2) network interface
to an OpenLNS (layer 5) network interface, all connections and
monitor sets may not be created on the new network interface. If
this happens, a dialog displays the items that will be lost and gives
you an opportunity to cancel the upgrade.
Scope: Current network, current OpenLNS CT computer
Enable Warning When
OpenLNS CT
Language Setting does
not Match Visio Displays a message when the language set in OpenLNS CT and
the currently installed language in Visio do not match.
Scope: All networks, current OpenLNS CT computer
Enable Warning When
OpenLNS CT
Language Setting does
not Match Network Displays a message when the languages set in OpenLNS CT and
the OpenLNS CT drawing do not match.
This can occur if the installed languages are different between
OpenLNS CT that created the OpenLNS CT drawing and the one
opening it.
Scope: Current network, current OpenLNS CT computer
Enable Visio Version
Warning Displays a message if the version of Visio installed on your
computer is incompatible with your version of OpenLNS CT.
This applies only to versions of Visio newer than Visio 2010 or
Visio 2003. If an older version of Visio is installed on your
computer and you do not also have Visio 2010 or Visio 2003
installed, OpenLNS CT will not run on your computer.
Scope: All networks, current OpenLNS CT computer