Echelon OpenLNS Commissioning Tool - Manual (Page 70)

54 Getting Started
5. If you are opening an OpenLNS CT network after starting OpenLNS CT for the first time, a
message may appear asking you if you want to enable macros. You must enable macros for
OpenLNS CT to function. See Working with Digital Signatures for more information.
6. Visio starts, your OpenLNS CT drawing opens, and the Server Location page of the Network
Wizard opens (unless you selected the Automatically Determine Server Location check box at
the bottom of this page when you previously opened the network).
By default, each subsequent page in the Network Wizard will appear every time you open the
OpenLNS CT drawing unless you previously selected the Skip This Prompt check box on the
page from the Network Wizard or from the Network Properties dialog in the drawing.
Tip: You can click Finish at any point in the Network Wizard to skip the subsequent series of
pages and open your OpenLNS CT network. Your OpenLNS CT network will be opened using
the settings in the Network Properties dialog in the drawing at the time it was last saved.
7. Under Server Location, select the client type of the computer on which OpenLNS CT is running.
See OpenLNS CT Client Types for more information on each of these client types.
• Select Local if OpenLNS CT is running on the same computer as the OpenLNS Server.
• Select Remote Full Client if OpenLNS CT is running on a computer different than the
OpenLNS Server and the OpenLNS CT computer is attached to a L ON W ORKS channel
through an IP-852 channel.
• Select Remote Lightweight Client if OpenLNS CT is running on a computer different than
the OpenLNS Server and the OpenLNS CT computer communicates with the OpenLNS
Server over TCP/IP.
Select the Automatically Determine Server Location check box to have OpenLNS CT
automatically determine the location of the OpenLNS Server when you re-open your
OpenLNS CT network. If this check box is cleared, OpenLNS CT will prompt you to select
the server location each time you open the drawing.