Echelon OpenLNS Commissioning Tool - Manual (Page 85)

OpenLNS CT User’s Guide 69
Privileges Select which actions the user can perform on objects in the
OpenLNS CT drawing.
You can set privileges for reading, modifying, changing the name,
adding, deleting, commissioning, and replacing objects, as well as
the use of plug-ins for the objects. The objects for which you can set
privileges consist of the network, subsystems, channels, application
devices, routers, functional blocks, connections, network variables,
and configuration properties.
While All Objects is selected, the privileges you set apply to all
objects. For example, to prevent this user from modifying any
object, click All Objects and then clear the Modify check box.
While Selection is selected, the privileges you set apply only to the
object specified in the Selection list. For example, to enable this
user to be able to modify functional blocks but not devices, click
Selection, select Functional Blocks, and then select the Modify
check box. Then select Application Devices from the Selection list
and clear the Modify check box.
4. Click Create if you are logged on as the Administrator; otherwise, click OK.
Note: Once the new user profile has been created, that user can open the network drawing and then
change their password or create new user profiles. A user can grant a new user only those privileges
that they have themselves.
Changing Passwords
All users can change their passwords. To change a password, follow these steps:
1. In the OpenLNS CT drawing, click Add-ins, point to OpenLNS CT, and then select User
Profiles. The User Profiles dialog box opens.
2. Click the Change Password tab.