Echelon OpenLNS Commissioning Tool - Manual (Page 356)

340 Appendix A - Setting OpenLNS CT Default Options
will not be stored in the device.
Scope: Current network, all OpenLNS CT computers
Set Location Property
to Subsystem ID Stores the subsystem ID in the location field of an application device
and router when the device is commissioned . Automatically updates
the subsystem ID in the location field when the application device or
router is moved or its subsystem is moved or renamed (provided that
the
Update all Devices when Subsystem Name is Modified option
is set to Yes ), or you select the Update Location Path and ID in
Devices check box in the Synchronize OpenLNS CT Drawing
dialog.
This check box is selected by default.
The subsystem ID is the first 15 bits of the OpenLNS subsystem
handle (in a very large network, with many subsystems where more
than 32767 subsystems have been created and deleted this could
result in multiple unique subsystems having the same ID).
Scope: Current network, all OpenLNS CT computers
Update all Devices
when Subsystem Name
is Modified Select whether OpenLNS CT updates the SCPTlocation
configuration property and location field in an application device or
router when the path or ID of its subsystem changes. You have three
choices:
• No. Devices are not updated. You will need to resynchronize
your OpenLNS CT drawing to update devices with the current
subsystem path and ID.
• Yes. Application devices and routers are automatically updated
to reflect the new subsystem path or ID.
• Ask. OpenLNS CT will prompt you whether to update devices.
This is the default.
Scope: Current network, all OpenLNS CT computers