Echelon OpenLNS Commissioning Tool - Manual (Page 30)

14 Installing and Activating OpenLNS CT
You can use the L ON W ORKS Interfaces application in the Control Panel to define, configure,
and test RNIs, IP-852 network interfaces, USB 10/20 network interfaces, and PCC/PCLTA
network interfaces.
• SLTA-10 Driver (Serial): Installs the network driver for the SLTA-10 serial network
interface. Click this check box if you are using an SLTA-10 serial adapter as your network
interface. This option is not available on 64-bit versions of Windows.
• Adobe Reader: Installs Adobe Reader 9.2, which is a free program that allows you to read
Adobe Acrobat portable document files (.pdf extension). Many of the L ON M ARK reference
documents are exclusively in PDF format. You can clear this check box if you already have a
PDF reader application.
5. Click Install. If you are upgrading from the LonMaker Integration Tool, a message opens
informing you that installing OpenLNS CT will remove any version of the LonMaker tool on your
computer.
6. Click Yes to continue installing OpenLNS CT. The installation program installs the selected
components sequentially, prompting you for required reboots.
7. During the installation, the following dialog opens, displaying the current progress of the
OpenLNS CT setup: