Echelon OpenLNS Commissioning Tool - Manual (Page 327)

OpenLNS CT User’s Guide 311
The scope selector definitions are:
0 Standard functional profile defined in the standard resource
file set.
3 User-defined functional profile, defined in a
manufacturer-specific resource file set.
4 User-defined functional profile, defined in a manufacturer
and device class specific resource file set.
5 User-defined functional profile, defined in a manufacturer
and device class/subclass specific resource file set.
6 User-defined functional profile, defined in manufacturer,
and device class/subclass/model number specific resource
file set.
See Setting User Functional Block Scopes and Types for more
information.
InitOnline
Specifies the initial state of the device application when it is first
commissioned.
• A value of 0 indicates that the device is to be placed offline.
• A value of 1 indicates the device is to be placed online.
• A value of 2 specifies that the device is to be disabled (only
applies to devices with a Node Object functional block,
otherwise, the devices are placed offline).
• A value of 3 indicates that the initial state of the device will
based on the default value set in the Network Properties:
Device options category.
The default value is 3 (the network properties value is used).
InstallMethod
Specifies the default device installation method (service pin or
manual entry).
• A value of 0 specifies service pin installation method.
• A value of 1 specifies manual installation method.
LmwStyle0
Specifies the coloring style applied to a device SmartShape when
it is in the Updates Pending state. The default style is Node
Uninstalled.
LmwStyle1
Specifies the coloring style applied to a device SmartShape when
it is up-to-date. The default style is Node Normal.
LmwStyle3
Specifies the coloring style applied to a device SmartShape when
it is in the Update Failed state. The default style is Node Error.
LmwStyle7
Specifies the coloring style applied to a device SmartShape when
OpenLNS CT detects that it is detached from the network.
LmwStyle8 Specifies the coloring style applied to a device SmartShape when
OpenLNS CT detects it to be in an unexpected state. For further
information about Visio styles, see the Visio documentation.
Locn A 12-digit hex string that specifies the default value of the
device’s location string. By default, the location string is
initialized to all zeroes unless you enable the Set Location
Property to Subsystem ID check box in the Network
Properties: Recovery options category.