Echelon OpenLNS Commissioning Tool - Manual (Page 344)

328 Appendix A - Setting OpenLNS CT Default Options
Device Selection block SmartShape, thereby skipping the Functional Block wizard.
This option is cleared by default.
The functional block SmartShape must contain a functional block
type specification for this feature to work. This feature will
therefore not work for the Functional Block SmartShape in the
OpenLNS CT Basic Shapes stencil. To accelerate network design,
create custom device master SmartShapes for each of the functional
block types that you typically use.
The order of the criteria used by OpenLNS CT to select the
appropriate device is as follows: (1) closest qualified device to
functional block SmartShape where the device is within 1 ½ times
the width of the functional block SmartShape, and then (2) device
most recently created or device that has most recently been assigned
a functional block. If no device can be selected using the preceding
criteria, the Functional Block wizard will appear.
Scope: All networks, current OpenLNS CT computer
Include Device Name
with FB SmartShape
in Drawing Includes the device name in the name displayed for a functional
block in the OpenLNS CT drawing. The device name followed by a
period will precede the functional block name. For example, the
default name of a functional block SmartShape associated with a
second analog output device created in the OpenLNS CT drawing
would be AO- 2. AO- 1. This option is selected by default.
Scope: Current network, all OpenLNS CT computers
Create SmartShapes
for all NVs Adds network variable SmartShapes for all network variables on a
functional block. This option is cleared by default.
Scope: Current network, all OpenLNS CT computers
Delete Dynamic FB
when FB SmartShape
is Deleted Deletes a dynamic functional block from a device when its
functional block SmartShape is deleted from an OpenLNS CT
drawing. You have three choices:
• No. The dynamic functional block is not deleted.
• Yes. The dynamic functional block is automatically deleted.
This is the default.
• Ask. OpenLNS CT will prompt you to decide whether to delete
the dynamic functional block.
Scope: All networks, current OpenLNS CT computer
Delete Dynamic NVs
when FB SmartShape
is Deleted Deletes a dynamic network variable from a device when its
functional block SmartShape is deleted from an OpenLNS CT
drawing. You have three choices:
• No. The dynamic network variable is not deleted.
• Yes. The dynamic network variable is automatically deleted.
This is the default.
• Ask. OpenLNS CT will prompt you to decide whether to delete
the dynamic network variable.
Scope: All networks, current OpenLNS CT computer
Delete Dynamic NV
when NV SmartShape Deletes a dynamic network variable from a device when its network
variable SmartShape is deleted from a functional block SmartShape.