Echelon OpenLNS Commissioning Tool - Manual (Page 59)

OpenLNS CT User’s Guide 43
See
4
Recovering an OpenLNS CT Network in Chapter 7, Maintaining
Networks, for more information.
Network Database
Path Specifies the folder that will contain the network database. By
default, the database path is
C:\Users\Public\Documents\LonWorks\OpenLnsCt\Databases\
<network name>.
You can specify a different to place the OpenLNS CT network
database; however, the network name in the database path must
match the one in the Network Name box.
Network Drawing
Path Specifies the folder that will contain the OpenLNS CT drawing. By
default, the drawing path is
C:\Users\Public\Documents\LonWorks\OpenLnsCt\
Drawings\<network name>.
You can specify a different to place the OpenLNS CT drawing;
however, the network name in the drawing path must match the one
in the Network Name box.
Network Description Contains an optional description of the network being created. This
field has no effect on network operation, but it can provide
additional documentation for as-built reports.
6. Click Next. The Network Interface dialog opens.
7. If your OpenLNS CT computer is attached to the physical network and you want OpenLNS CT to
communicate with the physical devices, select Network Attached. If you select this option and
you have more than one network interfaces in your computer, select the name of the OpenLDV 4.0
or IP-852 network interface under Network Interface Name.