Echelon OpenLNS Commissioning Tool - Manual (Page 61)

OpenLNS CT User’s Guide 45
10. Click Next. The Plug-In Registration dialog opens.
11. Use the following commands to register, deregister, enable, and disable plug-ins in your OpenLNS
CT network.
Register Adds a plug-in to the Pending list, indicating that the plug-in is to be
registered. A plug-in must be registered for it to be available within
OpenLNS CT.
This button is available when a plug-in listed under any category or a
category label (except Pending) is selected. If a category label is
selected, all the plug-ins under it will be registered.
Deregister Adds a plug-in to the Pending list, indicating that the plug-in is to be
deregistered. Once a plug-in is deregistered, it is no longer available
within OpenLNS CT.
This button is available when a plug-in listed under Already
Registered is selected, can be deregistered, and supports being
deregistered.
Enable Adds a plug-in listed under Disabled to the Pending category,
indicating that the plug-in is to be enabled. You can enable a plug-in
that you previously disabled.
This button is available when a plug-in listed under Disabled or the
Disabled category label is selected. If the Disabled category label is
selected, all the plug-ins under it will be enabled.
Disable Adds a plug-in listed under Already Registered or Not Registered to
the Pending category, indicating that the plug-in is to be disabled.
You can disable a plug-in to prevent OpenLNS CT from prompting
you to register the plug-in.
This button is available when a plug-in listed under Already