Uniden BCD396XT - Manual (Page 101)

Friday, November 07, 2008 101
Set Alert Light
You can select whether the scanner should have alert light when a tone-out Channel becomes active*.
Off
Blue
Red
Magenta
Green
Cyan
Yellow
White
If you select “Off”, the scanner returns to the previous menu.
If you select an alert light color, the scanner goes to the Alert Light Pattern selection.
On The alert light is set to on
Slow Blink The alert light blinks slowly
Fast Blink The alert light blinks fast
Press [E / yes / gps] to accept the entry and return to the previous menu.
*"Active" means that the scanner detects Tones and Mute state is set to Off.
Set Audio AGC
When Audio AGC function is “On”, the scanner judges volume of the signal and changes the volume
automatically.
You can turn “On” or “Off” AGC for Analog audio.
Analog : On / Off
On Audio AGC is on.
Off Audio AGC is off.
Turn [Scroll Control] to focus the cursor on the item. Press [E / yes / gps] to change the setting and press
[Menu] to return to the previous menu.