Uniden BCD396XT - Manual (Page 17)

Friday, November 07, 2008 17
Function + Scan / srch Key

Press to resume searching. (Search Hold Mode and while monitoring in Search Mode)

Press to toggle between ID SCAN and ID SEARCH while scanning a trunked system.

Press to display the Quick Search Prompt. (Except in Search Mode, Search Hold Mode, GPS Mode
and Band Scope Mode)

Press to return to the scanner screen. (GPS Mode)

Press to change the band scope search type. ( Band Scope Mode)
Hold / (Close Call) Key

Press to go to each Hold Mode. (Scan Mode, Search Mode, Close Call Only Mode, WX Scan Mode
and Band Scope Mode)

In Close Call Only Mode, the scanner sounds an Error Tone if it has not yet gotten a hit.

Press to resume scanning or searching. (Hold Mode)
Function + Hold / Key

Toggles the setting of Close Call.

Long press to start Close Call Only Mode.
L/O (Lockout) Key

Press once to temporarily lock out a system channel, a search frequency or a location data. This
lock out is canceled when the power is turned off then back on.

Press twice within one second to permanently lock out a system channel, a search frequency or a
location data. This lockout remains even if the power is turned off.

Long press to unlock all settings of the current system. (Scan Mode and Scan Hold Mode)

All Locations of the current Type are unlocked by long-pressing this key. (Review Location Mode)

The scanner unlocks all frequencies of Global Lockout List*. (Search Mode, Search Hold Mode,
Close Call Only Mode and Close Call Hold Mode)

Press to cancel a prompt without changing settings in Menu Mode.
*Global Lockout List means collecting the locked out frequencies at Search Mode, Search Hold Mode,
Close Call Only Mode and Close Call Hold Mode.