Uniden BCD396XT - Manual (Page 170)

Friday, November 07, 2008 170
Function Mode
[SCAN / srch] key
Press this key to display the prompt for starting Quick Search.
The scanner displays the prompt. Press [E / yes / gps] to start Quick Search, press [. / no / pri] to go to
Menu Mode at Search for..., press [L/O] to cancel the prompt or press [Hold / ] to go to Quick Search
Hold Mode.
[1 - 3 / sr 1 - 3] key
Press this key to start searching the search range set at Set Search Key.
[4 / LEFT / ifx] Key
While monitoring a frequency, press this key to exchange IF(intermediate frequency).
[7 / att] key
Press this key to toggle the attenuator state for the search range.
Long press this key to toggle global attenuator.
[0 / WX] key
Press this key to change to WX Scan or WX Alert Scan.
If you press this key in WX Scan Mode, you can selects how the WX Scan works and the scanner starts WX
Alert Scan.
Or, the scanner immediately starts WX Scan when this key is pressed in any WX Alert Scan Mode.
[E / yes / gps] key
Press this key to change to the GPS Mode.
[MENU] key
Press this key to go to WX Operation.
Key Operation During Weather (Alert) Scan Hold Mode
Normal Mode
[Scroll Control] knob
Turn this knob to select the Weather Channel.
[SCAN / srch] key
Press this key to go to Scan Mode.
[Hold / ] key
Press this key to resume each Weather Scan.
[1 - 9, 0] key
Press this key to enter numbers and go to Direct Entry.
[. / no / pri] key
Press this key to input decimal point, hyphen or “i” for Direct Entry.