Uniden BCD396XT - Manual (Page 231)

231
<COMMAND MNU>
Menu Mode
Controller → Radio
MNU,[MENU_INDEX][\r]
Radio → Controller
MNU,OK[\r]
[MENU_INDEX] : SVC_MENU : Service Search Select Menu
WX_MENU : WX Select Menu
CCBAND_MENU : Close Call Band Filter Menu
SCR_OPT_MENU : Broadcast Screen Band Menu
GL_LIST_MENU : Search Global Lockout List Review Menu
SETTING_MENU : Setting Menu
Note) Scanner returns NG in the state that the mode switch cannot be done.
<COMMAND JNT>
Jump to Number Tag
Controller → Radio
JNT,[SYS_TAG],[CHAN_TAG][\r]
Radio → Controller
JNT,OK[\r]
[SYS_TAG] : System Number Tag (0-999/NONE)
[CHAN_TAG] : Channel Number Tag (0-999/NONE)
When both [SYS_TAG] and [CHAN_TAG] are set as blank, scanner returns error.
When [SYS_TAG] is set as blank, [CHAN_TAG] is set with a number tag, scanner
jump to the channel number tag in current system.
When [SYS_TAG] is set with a number tag, [CHAN_TAG] is set as blank, scanner
jump to the first channel of the system number tag.
<COMMAND MDL>
Get Model Info
Controller → Radio
MDL[\r]
Radio → Controller
MDL,BCD396XT[\r]
Returns Model Information.
<COMMAND VER>
Get Firmware Version
Controller → Radio
VER[\r]
Radio → Controller
VER,Version 1.00.00[\r]
Returns Firmware Version.