Uniden BCD396XT - Manual (Page 180)

Friday, November 07, 2008 180
Examples of each Display Mode are as follows.
GPS DATA Display ETA Display Clock Display
Elevation Display Speed Display Location Display
GPS DATA Display
This Display Mode displays the direction of travel, the time, the speed and the elevation.

The left side of the 1st line displays the current direction of travel.

The right side of the 1st line displays the present time.

The left side of the 2nd line displays the current speed.

The right side of the 2nd line displays the elevation of the current location.

The 3rd line always displays "OFF" because a POI is not selected.
ETA / Clock / Elevation / Speed Display
These Display Modes display the direction and the distance for the selected POI, the direction of travel and
individual information.

The large arrow shows the direction to the selected POI.

The left side of the 1st line displays the current direction of travel.

The 2nd line displays the distance to the selected POI.

The right side of the 1st line displays individual information.
- ETA Display Mode shows the ETA (Estimated Time for Arrival) to the selected POI.
- Clock Display Mode shows the present time.
- Elevation Display Mode shows the elevation of the current location.
- Speed Display Mode shows the current speed.
The name of the selected POI is displayed on 3rd line.
Location Display
This Display Mode displays the latitude and longitude of the current location.

The 1st line displays the latitude of the current location.

The 2nd line displays the longitude of the current location.

The 3rd line displays "OFF" (when a POI is not selected) or the name of the selected POI.
SW 1h 10m
15. 03 mi
HOME
SCAN ↑ SW 01: 23P
39 mph 544 ft
OFF
SCAN ↑ SW 13: 23
15. 03 mi
HOME
SCAN ↑
SW 62 kph
24. 19 km
HOME
SCAN ↑ N 32”57' 33. 60
W 97”05' 34. 18
HOME
SCAN ↑ SW 166 m
24. 19 km
HOME
SCAN ↑