BINDER MK 115 - Manual (Page 38)

MKF + MKFT (E3.1) 07/2014 page 38/114
CAUTION
Danger of calcification.
Impairment of valve function.

Have a plumber inspect the two valves annually.
 Remove calcifications by citric acid or acetic acid solutions.
 Continue by testing the function and tightness of the mounted unit.
Check: Quickly open the water tap while there is no chamber connected – the valve should cut off the
water flux without any delay.
4.7 Installation of the voltage and frequency changer
(units with voltage and frequency changer)
The voltage and frequency changer is supplied packed separately together with the alternating climate
chamber.
CAUTION
Sliding or tilting of the voltage and frequency changer.
Damage to the voltage and frequency changer.
Risk of injury by lifting heavy loads.
∅
Do NOT lift the voltage and frequency changer by hand.
 Lift the voltage and frequency changer from the pallet using technical devices (fork
lifter). Set the fork lifter only from the rear in the middle of the unit..
 Alternatively, the voltage and frequency changer can also be lifted at the eyelets on
the top by means of a lift truck
(a) Eyelets for lifting with a lift truck
(b) Positions for a forklift
Figure 12: Positioning of aids for lifting the voltage
and frequency changer
(a)
(b)
(a)
(b)