BINDER MK 115 - Manual (Page 81)

MKF + MKFT (E3.1) 07/2014 page 81/114
16.4 Data logger kits
BINDER Data Logger Kits offer an independent long-term measuring system for temperature and humidi-
ty, available for different temperature ranges. According to the selected kit, the Data Logger can measure
and record also the ambient temperature and humidity values via a second multi-function sensor.
BINDER Data Loggers are equipped with a keyboard and a large LCD display, alarm functions and a
real-time function. Measurement data are recorded in the Data Logger and can be read out after the
measurement via the RS232 interface of the Data Logger. It offers a programmable measuring interval
and permits storing up to 64000 measuring values. Reading out is done with the Data Logger evaluation
software. You can give out a combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Sensor for chamber temperature: Temperature range -90 °C / -130 °F up to +220
°C / 428 °F .
Data Logger Kit TH 100: Multi-function sensor for chamber temperature and humidity: Temperature
range -40 °C / -40 °F up to +100 °C / 212 °F , humidity range 0% r.H. up to 100% r.H.
Data Logger Kit TH 100/70: Multi-function sensor for chamber temperature and humidity: Temperature
range -40 °C / -40 °F up to +100 °C / 212 °F, humidity range 0% r.H. up to 100% r.H. Multi-function sen-
sor for ambient temperature and humidity: Temperature range -40 °C / -40 °F up to 70 °C / 158 °F, hu-
midity range 0% r.H. up to 100% r.H.
For detailed information on installation and operation of the BINDER Data Logger, please
refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the
manufacturer, supplied with the data logger.
16.5 Keyboard locking (option)
The keyboard of the MB1 controller can be locked and unlocked via the key switch (6) in the lateral con-
trol panel. In the locked position, no entries to the controller are possible.
• Locked keyboard: Switch position vertical
• Unlocked keyboard: Switch position to the right
You can remove the key only when the keyboard is locked.
If the keyboard is locked, the notification “KEY LOCK” is displayed on the controller MB1 display (chap.
13).
16.6 BINDER Pure Aqua Service (option)
The optional BINDER water treatment system (disposable system) serves to treat tap water. The lifetime
depends on water quality and the amount of treated water. The measuring equipment to assess the water
quality is reusable.
For detailed information on operating the water treatment system BINDER Pure Aqua Ser-
vice and its function, please refer to the operating manual Art. No. 7001-0159, delivered
with BINDER Pure Aqua Service.