Auto-Zone Control Systems Auto-Zone CV & CV-EX Systems Installation & Operation (Version 01C) - Manual (Page 70)

Section 3 Auto-Zone CV & CV-EX
3-26 Programming
System Manager Keypad
Operations Summary
View/Change
[ Enter Unit ID# ]
Selected Unit: 101
SYSTEM ALARM STATUS
Clear Alarms? YES
To Change Response
Use Left/Right Arrow
Constant Volume Unit
Temperature: 75.4°F
Cooling SP.: 75°F
Heating SP.: 72°F
SYSTEM ALARM STATUS
Alarm @ Unit ID 118
vX.XX
1 Friday Operations
03/20/09 09:46 AM
Outdoor Air 78.0°F
Program Time/Date
Day (Sunday=0): 1
Enter Hr. (0-23): 9
Enter Minutes : 53
1) Set Time & Date
2) Read/Reset Units
3) New Passcodes
4) Rebuild Alarm Map
Program Time/Date
Month (1-12): 9
Day (1-31): 18
Year (00-99): 09
Daylight Savings
Adjustments Enabled
Use Left/Right Arrow
Enter New Passcode
Level 1.....: XXXX
Level 2.....: XXXX
[Must Be 4 Digits]
Clearing Old Map
....................
................
Building New Map
Loop: 1
Unit: 1
FOUND
Alarm Unit Map Built
Press Any Key To
Continue
Read/Reset
[ Enter Unit ID# ]
Selected Unit: 101
1) CVAHU Status
2) CVAHU Setpoints
MENU) Next Menu
ESC) To Exit
1) Schedules
2) Force Modes
MENU) Previous Menu
1) Wetbulb Status
2) Setpoints
ESC) To Exit
1) View/Change Zone
2) View Alarms
MENU) Full Access
ESC) Main Screen